QR Code Size Guide: How Big Should It Be?

Too small is the most common reason a printed code fails. Use this table to pick a size and avoid a reprint.

Make a QR code and download the SVG

Updated 19 November 2026 · 5 min read

Short answer

A QR code should be at least 2 cm (0.8 in) wide for close scanning, and about one tenth of the scanning distance for anything farther. A code scanned from 1 meter away should be around 10 cm wide. Keep the white border around the code, use dark on light, and print the SVG so the edges stay sharp.

The 10:1 rule

Divide your scanning distance by ten and you get the width the code needs. If people will stand 50 cm from it, the code should be about 5 cm wide. This is a rule of thumb, not a law, but it is right often enough to plan with. A short link and good contrast can go a little smaller. A long link or a logo needs more room.

Size by distance

Where it is scanned fromMinimum widthTypical use
20 cm (hand-held)2 cmBusiness card, product label
30 cm3 cmMenu, table tent, flyer
50 cm5 cmCounter, desk, A5 poster
1 m10 cmShop window, A4 poster
2 m20 cmWall poster, notice board
3 m30 cmBanner, event stand
5 m50 cmBillboard, large sign

The more characters you store, the more squares the code needs. Each square (called a module) then gets smaller at a given print size. A code for a short link might be 25 by 25 modules. A code for a very long link with tracking parameters can pass 45 by 45, and the same 3 cm print now has squares less than half as big. Scanners struggle with tiny modules. If you must print small, shorten the link. More on that in how much data a QR code can hold.

The quiet zone: do not crop the border

The empty white margin around a code is part of the code. Scanners use it to find the edges. The standard asks for a margin at least four modules wide. If you crop it for a tight layout, scanning gets slower or fails. If a design needs the code on a colored shape, put a light panel under it.

Contrast and colors

  • Dark code on a light background is the safest choice.
  • Light code on dark (an inverted code) is not read by every scanner. Avoid it for important prints.
  • Pastel on pastel, or red on orange, will fail in dim light.
  • Check your colors in grayscale. If you cannot see the pattern clearly, a camera cannot either.

Printing tips

  • Export SVG for print. It stays sharp at any size. PNG is fine for screens. See PNG vs SVG for QR codes.
  • Do not stretch the code. Keep it perfectly square.
  • Avoid glossy laminate that throws a glare. Matte works better.
  • Do not wrap a code around a curved bottle tightly, or put it over a fold or seam.
  • Print a test at the real size and scan it with two phones before you order 1,000 copies.

Digital sizes

On a screen, show the code at least 200 pixels wide, with space around it. On a presentation slide shown to a room, make it big enough to fill about a third of the slide height, and leave it up long enough for people to scan.

Frequently asked questions

What is the minimum size for a QR code?

About 2 cm (0.8 in) wide for close, hand-held scanning. Bigger if the link is long or people scan from further away.

How big should a QR code be on a poster?

Use one tenth of the scanning distance. A poster read from 2 meters needs a code about 20 cm wide.

Does a longer URL need a bigger QR code?

Yes. More data means more squares, so each square gets smaller at the same print size. Shorten the link or print bigger.

How much white space should a QR code have?

At least four modules of empty margin on every side. Keep the white border when you place the code in a design.

Can I print a QR code on a business card?

Yes, at about 2 to 2.5 cm wide with a short link and dark ink on a light background. Test the printed card before you order.